Missouri Precision Tool, Inc.
866- 94 TOOLS
314 487 2686
314 487 2868 Fax
US Veteran Owned.
Rockhard Rotary Rebar Cutters
Helpful Application Tips:
- Designed for use in standard 1/2” drill motor with 3-jaw chuck
- Must be used in Rotation Mode Only: Percussion (hammer mode) will damage the tool
- Low RPM’s best, use ample operator pressure, remove steel “slug” from hole or rebar cutter, dry-cut recommended
- Sizes 7/8” through 1-3/4” have a 1/2” hex shank size; 2” and 2-1/2” have a 3/4” hex shank
- Caution: Rebar Cutters are designed to be problem solvers. Hole performance can vary greatly depending on the application and how the rebar is encountered. They should not be used for drilling concrete.
- Rebar Cutters are not warrantied for repair or replacement.