Missouri Precision Tool, Inc.

(866)-94 TOOLS toll free
866-948-6657 toll free
Sales@MO2LS.COM
314-487-2868 fax
Store Front Account Search Product List Basket Contents Checkout

Sign In
Order History

Missouri Precision Tool, Inc.
866- 94 TOOLS
866-948-6657
314 487 2686
314 487 2868 Fax

US Veteran Owned.


Concrete - Masonry Drilling
Floor Sanding Abrasives
Relton Carbide Tipped Masonry Bits
   Carbide Tipped Bell Hanger Bits, Relton
   Rebar Rotary Carbide Drills/Cutters, Relton
   Relton Brazed Carbide Hole Saws
     Relton Carbide Tipped Hole Saw for Tub and Spa
     Relton Carbide Hole Saw, Hard Plastic & Stucco
     Relton Carbide Hole Saw, Wood and Fiberglass
     Relton Carbide Hole Saws
     Relton Carbide Porcelain Hole Cutter
     Relton Carbide Thin Gauge Hole Saw
     Relton Interrupted Cut Carbide Hole Saws
   SOLID-BODY “HARD-HEAD” BITS, Relton
Rockhard SDS MAX and Spline Shank Extension
ROCKHARD Titanium Step Drills
Rockhard Tools, Inc.
SDS Rockhard Dust Control Drill Bits
Tenryu Carbide Tipped Saw Blades
Virginia Abrasives
Sait


Relton Carbide Porcelain Hole Cutter

SAME DAY SHIPPING

For Installing: Reverse Osmosis Systems, Hot-Water Dispensers, Spa Jets in pre-existing bathtubs

Relton Porcelain Cutter Kits are designed with the Finish Saw 1/8" smaller in diameter than the Porcelain Saw. The Finish Saw diameter is used to determine which kit should be purchased.
Relton Carbide Porcelain Hole Cutter

Code Name Image Price  
Note: Kits are designed for porcelain over cast iron, NOT for solid Porcelain.

Relton Specialty Carbide Hole Saw Catalog (500k pdf)

CARE AND USE OF CARBIDE-TIPPED HOLE SAWS

Relton Carbide-Tipped hole saws are available for use in a wide range of materials, including: metal, wood, plastics, masonry, ceramics, marble and fiberglass. Be sure you have the correct Relton hole saw for your application. Please see page 4 for spring ejector instructions. Relton hole saws can be easily resharpened. The high-quality carbide inserts are replaceable, allowing for complete rebuilding of the saw. Contact the Missouri Precision Tool 1-866-94 TOOLS for more information on the resharpening or rebuilding of your hole saw.

Relton Carbide-Tipped hole saws will provide the lowest cost per hole when the following use and care instructions are observed:

1.) Insert the hole saw shank into the chuck of the power tool properly. If the shank is inserted off center, or the chuck is not tight, vibration may damage the hole saw.

2.) Tighten the shank firmly to the hole-saw head. Allowing the shank to be loose in the head will cause excessive vibration that may damage the cutting teeth and the material being cut.

3.) Hold the hole saw and drive unit as steadily as possible. Use a drill press or drilling fixture when possible. Allowing the drive unit or the hole saw to wobble will create undue stress and may cause the cutting teeth to strip out or the saw head to break.

4.) The saw should be held at a 90° angle to the surface of the material being cut. Sawing on an angle that is not 90 ° to the surface may cause the cutting teeth of the hole saw to contact the material unevenly, thus breaking the saw. There are some types of saws that do allow for an "interrupted cut.'

5.) A recommended RPM table is supplied with these use-and-care instructions. Operate the hole saw near the speed listed in the table. Running the saw faster than the recommended RPM may cause the saw to wear unnecessarily.

6.) Apply adequate pressure on the saw while cutting. Allowing the cutter points to contact the work without applying adequate pressure may cause the cutter points to dull earlier than normal.

7.) Always wear safety glasses and keep fingers and hands away from the saw while it's in operation. Don't wear loose clothing near an operating hole saw.

8.) Cutting fluids, such as Relton Rapid Tap®, Hard-Metal Cutting Fluid, and A-9®, Aluminum Cutting Fluid, can be used on a Carbide-Tipped hole saw to extend cutter life and maintain a clean, consistent cut in metals. If a lubricant Is to be used, it must be applied prior to the heat build-up that occurs when a saw contacts the workpiece.

9.) Relton hole saws should be used in conformity with the power tool manufacturer's specifications.


Need Help?
Got Questions?

Please enter your question or issue in the text box below.

Enter your name and email address so we can reply to your question or concern.



Ecommerce Shopping Cart Software by Miva